SHENZHEN DHX TECHNOLOGY LIMITED
Menu
| MODEL | YY-D-200-5 V-K | |
| OUTPUT | DC VOLTAGE | 5V |
| RATED CURRENT A1 | 40A(Input Voltage:100V～175V) | |
| RATED CURRENT A2 | 40A(Input Voltage:176V～240V) | |
| CURRENT RANGE | 0～40A | |
| RATED POWER | 200W | |
| RIPPLE&NOISE | ≤100mV | |
| VOLTAE ADJ.RANGE | ±0.2V | |
| VOLTAGE TOLERANCE | ±1% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±2.0% | |
| SET UP TIME | 50mS | |
| HOLD UP TIME | 20mS | |
| INPUT | VOLTAGE RANGE | 100V～240V |
| FRE.RANGE | 47-63Hz | |
| EFFICIENCY | 91% | |
| POWER FACTOR | PF＞0.99/110V(Full Load),Thank you for reading this post, don't forget to subscribe!
PF＞0.97/220V(Full Load) |
|
| INRUSH CURRENT | ≤60A | |
| LEAKAGE CURRENT | ≤2.0mA | |
| PROTECTION | INPUT UNDERVOLTAGE | 80V～85V |
| INPUT OVER VOLTAGE | 270V～280V | |
| INPUT OVER CURRENT | 3A | |
| OUTPUT OVER VOLTAGE | 5.75V～7.5V(Re-start） | |
| OUTPUT LIMIT CURRENT | 44A～52A | |
| OVER TEMPERATURE | 95℃±5℃ | |
| THERMAL METHODS | Cooled by air | |
| ENVIRONMENT | WORKING TEMP. | —30℃～+60℃ |
| WORKING HUMIDITY | 20～90%RH | |
| STORAGE TEMP.,HUMDITY | —40℃～+80℃,10～95%RH | |
| TEMP.COEFFICIENT | ±0.03%/℃（0～50℃） | |
| VIBRATION | 10-300MHz,1G,10 min./1 cycle， | |
| Period for 60min each axes. | ||
| SAFETY | SAFETY STANDARDS | GB4943、UL60950、EN60950 |
| EMC STANDARDS | GB9254、EN55022A | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC/3mA/1min | |
| I/P-FG:1.5KVAC/3mA/1min | ||
| O/P-FG:0.5KVAC/3mA/1min | ||
| ISOLATION RESISTANCE | I/P-O/P:100MΩmin/500VDC | |
| CERTIFICATION | CQC/ CE/ CB/ ROHS/CCC | |
| OTHERS | DIMENSION | 142*60*30mm
|
Put the circuit board in the fixture and then place it under a gravity tool to flatten it to the same level.
Use a tin brushing machine to evenly brush solder paste on the IC or lamp positions.
.
To ensure quality assurance, use testing machines to check if the solder injection points on the circuit board have been coated with solder paste.
high-speed SMT machine can produce up to 1000 LED modules per day, ensuring timely delivery for our customers.
Use reflow soldering to fix the leds, ICs, capacitors and resistors on the circuit board.
To ensure quality assurance,after fixing all components to circuit board, Will manually test the performance of LED modules.
Automatic Screw Machine: Use the screw machine to fix the circuit board with the bottom shell.
Automatic glue machine: Using an automatic glue machine to glue outdoor LED screen modules to achieve IP65 waterproof level.
The third door to quality assurance:Check the sealing condition of each module to ensure 100% waterproofing of the product.
The fourth step in quality assurance is to manually test the performance of the finished LED screen module.
Aging test: The finished led screen module undergoes a 48 hours aging test to ensure product quality.
We will contact you within 1 working day, please pay attention to the email with the suffix”@dhxsigns.com“.
We will contact you within 1 working day, please pay attention to the email with the suffix”@dhxscreen.com“.
Fill out the form below, and we will be in touch shortly.